For environmental monitoring teams deploying ground robots or low-speed unmanned vehicles, the sensor specifications that matter most are detection range, field of view, output data, interface type and environmental resilience. The HS 77G 20M MMW from Suzhou hexsoon Technology Co. is a 77GHz band short-range, medium-low speed obstacle avoidance radar that transmits cone-shaped electromagnetic waves forward, detects reflections, and reports the relative distance, angle and speed of any obstacle ahead. Understanding what each of those capabilities means in practice is the difference between a sensor that fits your mission and one that creates integration problems.
What Millimetre-Wave Radar Specifications Actually Mean
Millimetre-wave (MMW) radar works differently from optical sensors. Instead of relying on light, it transmits electromagnetic waves in the 77GHz band and analyses the reflections that return from objects in front of the sensor. From those reflections, the radar determines whether an obstacle is present and feeds back three pieces of information: the relative distance, angle and speed of the obstacle with respect to the radar.
Each of those outputs has a practical role in obstacle avoidance. Distance tells the control system how much room remains before contact. Angle indicates where the obstacle sits within the sensor's coverage, which matters for steering decisions. Speed shows whether the obstacle is stationary or moving toward or away from the platform, which is essential when a robot or low-speed vehicle is operating around people, animals or other vehicles. According to the manufacturer, the HS 77G 20M MMW has a large detection angle and can analyse a target's information, category and motion status, which allows it to alert the operator or control system during both forward movement and reversing.
Detection Range and Mission Fit: 20M vs 80M Variants
The HS 77G MMW family is listed on the SkyDrone Max marketplace in two variants: the HS 77G 20M MMW and the HS 77G 80M MMW. Both share the same product description, the same 77GHz band, the same CAN/TTL interfaces and the same forward/reverse collision avoidance function. The model designations differ, which suggests they serve different range requirements, but the supplied descriptions do not state the exact detection figures for either variant. For procurement purposes, treat the range difference as a question to resolve with the supplier rather than an assumption.
| Attribute | HS 77G 20M MMW | HS 77G 80M MMW |
|---|---|---|
| Radar band | 77GHz | 77GHz |
| Function | Short-range, medium-low speed obstacle avoidance | Short-range, medium-low speed obstacle avoidance |
| Detection output | Relative distance, angle, speed | Relative distance, angle, speed |
| Interfaces | CAN/TTL | CAN/TTL |
| Forward/reverse collision avoidance | Yes | Yes |
| Brand | Suzhou hexsoon Technology Co. | Suzhou hexsoon Technology Co. |
| Exact range figures | Contact us for the datasheet | Contact us for the datasheet |
For mission fit, the practical question is how much warning distance your platform needs at its operating speed. A slow-moving environmental monitoring robot navigating dense vegetation or confined paths can typically work with a shorter-range sensor, while a platform travelling faster or needing earlier obstacle detection benefits from a longer-range variant. Because the supplied data does not quantify the range of either model, request the datasheet for both variants and match the figures to your platform's stopping distance and speed profile.
Interfaces and Integration: Why CAN/TTL Matters
A sensor is only useful if your platform can read its output. The HS 77G MMW integrates peripheral interfaces for CAN and TTL, two of the most common communication standards in robotics and unmanned vehicle design. CAN is widely used in vehicle-grade systems for reliable, noise-tolerant communication, while TTL serial interfaces are straightforward to connect to microcontrollers and flight or ground control stacks. Having both options on one sensor reduces the need for additional protocol converters and shortens the integration path.
The manufacturer also highlights the sensor's compact size. For environmental monitoring platforms, where payload space is often constrained by other instruments such as air quality modules, cameras or sampling equipment, a small radar footprint preserves room for mission payloads. The description explicitly positions the product for low-speed forward or rearward reversing safety assisted driving and for various types of obstacle avoidance on robots, which is the use case most environmental monitoring ground platforms fall into.
Complementary Sensors: IMU and INS for Environmental Monitoring Platforms
Obstacle avoidance radar solves one problem: not hitting things. Environmental monitoring missions usually require a broader sensor stack, and two related products on the marketplace address the other core needs of motion measurement and positioning.
The IMU100S from Wuxi BEWIS Sensing Technology LLC is a customised, highly accurate inertial measurement unit that measures angular velocity and acceleration of moving carriers. It uses 6-state Kalman filtering on raw data, which makes it suitable for inertial measurements in motion or vibration. Its hermetically sealed design and rigorous production process are intended to preserve measurement accuracy in harsh environments, a relevant consideration for monitoring platforms operating in dust, heat or humidity. The digital interface is designed for easy integration into the user's system.
For positioning and navigation, the LH-INS600M-21A series from I-NAV Technology Co., Ltd. is a high-accuracy integrated navigation system that combines inertial navigation, satellite navigation supporting RTK, and vehicle information. Its published parameters include heading angle accuracy of 0.1 degrees or better with a 1m dual-antenna baseline under satellite combination, attitude angle accuracy of 0.1 degrees or better, horizontal position accuracy of 0.2% or better after GNSS loss of lock for 1 km or 120 seconds, and speed accuracy of 0.1 m/s or better under satellite guidance. It supports dead reckoning and dual-antenna orientation, uses vehicle-motion-constrained navigation algorithms, and can integrate external odometry data. The manufacturer lists applications in autonomous driving, precision agriculture, assisted driving, robotics, logistics transportation and special equipment.
What Buyers Should Ask Suppliers Before Committing
Specification sheets for sensors often omit the details that determine integration success. Before purchasing an obstacle avoidance radar or navigation sensor for an environmental monitoring programme, put the following questions to the supplier:
- What is the exact detection range and angular coverage of the radar variant you are considering, and what are the minimum and maximum speeds at which it is designed to operate?
- Which CAN and TTL protocol versions and message formats does the sensor support, and can the supplier provide integration documentation or sample data?
- What environmental ratings apply to the sensor housing, and is the unit sealed against dust and moisture for the conditions of your deployment area?
- For the IMU100S, what are the accelerometer and gyroscope specifications, and what accuracy can be expected in the vibration profile of your specific platform?
- For the LH-INS600M-21A, what baseline length and antenna setup does the dual-antenna heading function require, and how does the system behave during extended GNSS outages?
- What support does the supplier offer for calibration, firmware updates and integration with your existing control system?
Where the supplied product data does not state a figure, such as the precise detection range of the HS 77G 20M MMW or the HS 77G 80M MMW, contact us for the datasheet. Do not accept a verbal range estimate; ask for the documented specification.
Environmental Monitoring Deployments in West Africa
Environmental monitoring programmes in West Africa often operate ground robots and low-speed vehicles in conditions that stress sensors: dust-laden air during the dry season, high humidity in coastal zones, uneven terrain and vegetation that can obstruct optical sensing. Millimetre-wave radar is relevant here precisely because it does not depend on light or clear air; it transmits electromagnetic waves and reads reflections, so it can detect obstacles regardless of lighting conditions. The IMU100S's hermetically sealed design, described by the manufacturer as maintaining accuracy in harsh environments, and the LH-INS600M-21A's ability to hold position accuracy through GNSS loss of lock both address the reliability concerns that come with operating in remote areas where satellite visibility can be intermittent. When specifying a sensor stack for these deployments, ask each supplier to confirm how the product performs in the temperature, humidity and dust conditions of your operating region, and request the datasheet where the public listing does not state environmental ratings.
Building a Coherent Sensor Stack
A well-specified environmental monitoring platform layers three sensor functions: perception of obstacles, measurement of its own motion, and knowledge of its position. The HS 77G MMW radar family covers the first, the IMU100S covers the second, and the LH-INS600M-21A covers the third. All three are designed for integration, with CAN/TTL interfaces on the radar, a digital interface on the IMU, and external odometry input support on the navigation system. When evaluating any of these products, compare the documented specifications against your platform's speed, payload, environment and control architecture, and use the supplier questions above to close the gaps in the public data before you commit budget.
Featured product
HS 77G 20M MMW
HS 77G MMW is a 77GHz band short-range medium-low speed obstacle avoidance radar, which transmits cone-shaped electromagnetic waves to the front, detects the reflection of electromagnetic waves, determines whether there is an obstacle in front of it, and feeds back information on the relative distance, angle, and...
Products mentioned in this guide
Large range small volume inertial measurement units
The IMU100S is a customised, highly accurate inertial measurement unit that measures angular velocity and acceleration parameters of moving carriers. The raw data is estimated by...
View product details →
HS 77G 80M MMW
HS 77G MMW is a 77GHz band short-range medium-low speed obstacle avoidance radar, which transmits cone-shaped electromagnetic waves to the front, detects the reflection of...
View product details →
TLH-INS-A vehicle positioning and directional navigation system
Product parameters: ① Heading angle accuracy: ≤ 0.1 °, 1m baseline; Dual antenna; Condition: Satellite combination ② Attitude angle accuracy: ≤ 0.1 ° ③ Horizontal position...
View product details →Frequently asked questions
What is the HS 77G 20M MMW and what does it do?
The HS 77G 20M MMW from Suzhou hexsoon Technology Co. is a 77GHz band short-range, medium-low speed obstacle avoidance radar. It transmits cone-shaped electromagnetic waves forward, detects reflections, and reports the relative distance, angle and speed of obstacles, alerting the operator or control system during forward movement or reversing.
What is the difference between the HS 77G 20M MMW and the HS 77G 80M MMW?
Both are listed as 77GHz short-range, medium-low speed obstacle avoidance radars with identical descriptions, CAN/TTL interfaces and forward/reverse collision avoidance. The model designations differ (20M and 80M), indicating different range variants, but the supplied descriptions do not state exact detection figures. Contact us for the datasheet to confirm the range of each variant.
Can the HS 77G MMW radar integrate with my robot or ground vehicle?
The manufacturer states the sensor has a compact size and integrated peripheral interfaces (CAN/TTL), and is designed for low-speed forward or rearward reversing safety assisted driving and various types of obstacle avoidance for robots. Confirm CAN and TTL protocol compatibility with your control system before purchase.
Do I need an IMU and INS if I already have an obstacle avoidance radar?
They serve different functions. The radar detects obstacles; the IMU100S measures angular velocity and acceleration of the moving carrier, and the LH-INS600M-21A provides heading and position, including dead reckoning during GNSS loss of lock. Environmental monitoring platforms typically need all three functions.
Is the HS 77G MMW radar suitable for harsh environments such as West Africa?
The supplied description does not state environmental ratings, sealing or operating temperature range for the HS 77G MMW radar. Contact us for the datasheet to confirm environmental specifications. For comparison, the IMU100S is described as using a hermetically sealed design for accurate measurement in harsh environments.
Need help selecting the right system?
Tell us your mission, payload, and operating environment. Our team will help you compare options and request the right datasheets from verified suppliers.