The HAKRC 7155 120A 4-in-1 ESC and the RX102 are not direct substitutes for one another: the HAKRC 7155 is a four-in-one electronic speed controller that manages motor power delivery, while the RX102 is a lightweight, anti-jamming satellite antenna receiver component. If you are procuring electronics for a security or counter-UAS drone platform, the practical question is not which of the two is better, but which one your build needs. This comparison sets out what the supplied data confirms about each component, where the data gaps are, and how to decide between them based on mission fit.
What Each Component Actually Does
The HAKRC 7155 120A 4 in 1 ESC, manufactured by Shenzhen Haike Technology Co., Ltd., is a power-distribution component in the Chip category. Its model designation, HAKRC 12S 120A, indicates a 12S-rated, 120A four-in-one ESC configuration. It combines four ESC channels on a single board, which is a common approach for multi-rotor platforms where wiring simplicity and board space matter.
The RX102, from Beijing Rongzhi Spacetime Technology Co., Ltd., is a different class of component. It is described as a lightweight, high-performance anti-jamming satellite antenna (receiver) component designed specifically for industrial drone applications requiring resistance to interference. In a security or counter-UAS context, that positioning is relevant: platforms operating in contested or congested RF environments depend on navigation receivers that can resist jamming.
Side-by-Side Comparison: What the Data Confirms
The table below compares only attributes that appear in the supplied product data. Where a specification is not published, it is marked as unavailable, and you should request a datasheet rather than assume a value.
| Attribute | HAKRC 7155 120A 4-in-1 ESC | RX102 |
|---|---|---|
| Component type | 4-in-1 electronic speed controller (ESC) | Anti-jamming satellite antenna (receiver) component |
| Brand | Shenzhen Haike Technology Co., Ltd. | Beijing Rongzhi Spacetime Technology Co., Ltd. |
| Category | Chip | Chip |
| Model designation | HAKRC 12S 120A (4-in-1) | RX102 |
| PCB construction | 8-layer, 4oz thickened copper foil, resin plug hole process, double pad design | Not published - contact us for the datasheet |
| MOSFET rating | Imported 80V high-current MOS | Not published - contact us for the datasheet |
| Power regulation | Industrial-grade LDO, high temperature resistance | Not published - contact us for the datasheet |
| Capacitors | Japanese Murata capacitors, strong filtering performance | Not published - contact us for the datasheet |
| LED features | Programmable LED magic lights | Not published - contact us for the datasheet |
| Weight, dimensions, connectors | Not published - contact us for the datasheet | Not published - contact us for the datasheet |
| Certifications | Not published - contact us for the datasheet | Not published - contact us for the datasheet |
The comparison makes the functional difference clear. The HAKRC 7155 has published construction details covering its PCB, MOSFETs, power regulation, and filtering. The RX102 has a published functional description but no published electrical or mechanical specifications. Neither product has published certification or test data, so any compliance requirement must be verified with the supplier before purchase.
HAKRC 7155 120A ESC: Power Delivery for High-Load Platforms
For procurement teams, the HAKRC 7155's published construction details translate into three practical considerations. First, the 8-layer PCB with 4oz thickened copper foil and a double pad design is stated to provide stronger overcurrent capability and good heat dissipation. For a 120A four-in-one ESC, thermal management and current handling are the primary engineering concerns, and these are the areas the manufacturer addresses directly.
- Imported 80V high-current MOSFETs are specified for long life and strong load capacity, relevant for platforms running higher-voltage 12S battery systems.
- An industrial-grade LDO is used for high temperature resistance, which matters for sustained hover or loiter duty in hot climates.
- Japanese Murata capacitors provide strong filtering performance, reducing electrical noise on the power rail.
- Programmable LED magic lights are included, which can support visibility or status indication on operational platforms.
Note that the published data does not include current curves, efficiency figures, thermal test results, or connector specifications. If your build requires those values for integration, contact us for the datasheet.
RX102 Anti-Jamming Receiver: What Buyers Should Verify
The RX102's published description is deliberately narrow: it is a lightweight, high-performance anti-jamming satellite antenna (receiver) component for industrial drone applications requiring resistance to interference. That is a meaningful positioning statement for security and counter-UAS work, where GNSS jamming and spoofing are recognised threats to unmanned platforms.
However, the published data does not specify the supported GNSS constellations, jamming rejection performance, power consumption, weight, dimensions, interface, or output format. For a component whose entire purpose is interference resistance, those figures are essential to a procurement decision. We recommend that buyers request the datasheet and, where mission risk is high, ask for independent test evidence before specifying the RX102 in a platform.
Related Components Worth Reviewing in the Same Category
Two other Chip-category products on the marketplace may be relevant depending on how your build is structured. The UAV Flying Tower HAKRC 70A F4 8S Stack, also from Shenzhen Haike Technology, is a flight-control stack rather than a standalone ESC. Its published features include a 6-layer 1oz copper PCB with strong anti-interference ability, a dual gyroscope design to reduce single-sensor error, an industrial-grade LDO for high temperature resistance, a solder-free direct plug-in connector, four programmable LED lights, a reserved 10V power supply for external LED strips with remote-control channel switching, ground-station-configurable image transmission power switching, and Murata capacitors. Its size is 36 x 36mm with a 30.5 x 30.5mm mounting hole pattern. Buyers comparing the HAKRC 7155 against the HAKRC 70A F4 stack should note the differences: the 7155 is a 120A four-in-one ESC with an 8-layer 4oz PCB, while the 70A F4 is a lower-current 8S stack with integrated flight-control features such as the dual gyroscope.
The ZTG008N04GC from Shenzhen Ztasemi Technology is a discrete MOSFET rather than a complete ESC. It uses the SGT CLIP package with ultra-low on-resistance (Rds(on)) and copper clip construction, which the manufacturer states reduces conduction losses, lowers package inductance and thermal resistance, and provides a wider Safe Operating Area (SOA) for harsher operating conditions. It is suited to small-size, high-power-density designs and brushless DC motor applications. If your team is designing its own ESC or power stage rather than buying a finished board, the ZTG008N04GC is the component-level option; the HAKRC 7155 is the finished-board option.
Selection Guidance for Security and Counter-UAS Missions
For security, patrol, and counter-UAS platforms, including operations in Southern Africa where long-range patrol flights and RF-contested environments are common procurement considerations, match the component to the subsystem rather than comparing them head-to-head:
- Choose the HAKRC 7155 120A 4-in-1 ESC if your platform needs a consolidated, high-current four-in-one ESC with published construction details supporting overcurrent capability and heat dissipation, particularly on 12S-class multi-rotor builds.
- Choose the RX102 if your platform operates in environments where GNSS interference is a risk and you need an anti-jamming satellite antenna receiver component; verify its specifications with the datasheet first.
- Consider the HAKRC 70A F4 8S Stack if your build needs an integrated flight-control stack with dual gyroscope redundancy and solder-free installation, and your current requirements are below the 7155's 120A rating.
- Consider the ZTG008N04GC only if you are designing a custom power stage and need a discrete MOSFET with low on-resistance and high power density.
In practice, many security and counter-UAS platforms will use both a power ESC and an anti-jamming receiver: the HAKRC 7155 addresses motor power delivery, while the RX102 addresses navigation resilience. The correct procurement step is to request datasheets for both, confirm electrical and mechanical compatibility with your flight controller and airframe, and validate any compliance requirements with the suppliers before committing to a design.
Featured product
HAKRC 7155 120A 4 in 1 ESC
1.PCB adopts high-end 8-layer 4oZ thickened copper foil, applies high-end resin plug hole PCB production process, double pad design, stronger overcurrent capability and good heat dissipation. 2.MOS adopts imported 80V high current MOS, long life and strong load capacity. 3.Adopt industrial-grade LDO, high temperature...
Products mentioned in this guide
RX102
The RX102 is a lightweight, high-performance anti-jamming satellite antenna (receiver) component designed specifically for industrial drone applications requiring resistance to...
View product details →
UAV Flying Tower HAKRC 70A F4 8S Stack
1.PCB adopts high-end 6-layer 1oZ thickened copper foil with strong anti-interference ability. 2.Dual gyroscope design is adopted to reduce the error of one gyroscope....
View product details →
ZTG008N04GC
ZTG008N04GC features the SGT CLIP package, with its ultra-low on-resistance (Rds(on)) and outstanding heat dissipation performance boosting system efficiency. Ultra-Low...
View product details →Frequently asked questions
Is the HAKRC 7155 120A 4-in-1 ESC a direct alternative to the RX102?
No. The HAKRC 7155 is a four-in-one electronic speed controller for motor power delivery, while the RX102 is an anti-jamming satellite antenna (receiver) component. They serve different functions in a drone build and are not substitutes for one another.
What voltage and current does the HAKRC 7155 support?
The model designation, HAKRC 12S 120A, indicates a 12S-rated, 120A four-in-one ESC configuration. The published data also specifies imported 80V high-current MOSFETs. For full electrical specifications, contact us for the datasheet.
What specifications are available for the RX102?
The published data describes the RX102 as a lightweight, high-performance anti-jamming satellite antenna (receiver) component for industrial drone applications requiring resistance to interference. Detailed specifications such as weight, dimensions, power consumption, and supported constellations are not published; contact us for the datasheet.
How does the HAKRC 7155 compare to the HAKRC 70A F4 8S Stack?
The HAKRC 7155 is a 120A four-in-one ESC with an 8-layer 4oz copper PCB. The HAKRC 70A F4 is a flight-control stack with a 6-layer 1oz PCB, dual gyroscope design, solder-free direct plug-in connector, and a 36 x 36mm size with 30.5 x 30.5mm mounting holes. The 7155 is a power component; the 70A F4 integrates flight-control functions.
Do either of these products have published certifications or test results?
No certifications or test results are published in the supplied data for either the HAKRC 7155 or the RX102. If your procurement requires certification evidence, contact us for the datasheet and request supporting documentation from the manufacturer.
Need help selecting the right system?
Tell us your mission, payload, and operating environment. Our team will help you compare options and request the right datasheets from verified suppliers.